DIAMOND BLADES FOR DRY CUTTING

• Art 75B – Ultra thin diamond blade Ø 115 (Professional Turbo)
• Ø 115mm
• Hole – 22.2mm
• Thick for cut – 1.3mm

• Art 75C – Ultra thin diamond blade Ø 115 (Close Sector)
• Ø 115mm
• Hole – 22.2mm
• Thick for cut – 1.3mm

• Art 75F – Diamond blade Ø 150 (Glass Mosaic Continuous Crown)
• Ø 150mm
• Hole – 25.4mm
• Thick for cut – 1.7mm

DIAMOND BLADES FOR WET CUTTING

• Art 79C – Diamond blade Ø 250 (Close Sector)
• Ø 250mm
• Hole – 30mm
• Thick – 2.5mm

• Art 74C – Diamond blade Ø 300 (Close Sector)
• Ø 300mm
• Hole – 30mm
• Thick – 2.7mm

• Art 60 – Diamond blade Ø 200 (Profi-Continuous Crown)
• Ø 200mm
• Hole – 30mm
• Thick – 2.1mm

• Art 60E – Diamond blade Ø 200 (Profi-Continuous Crown)
• Ø 200mm
• Hole – 30mm
• Thick – 2.1mm

• Art 61 – Diamond blade Ø 250 (Profi-Continuous Crown)
• Ø 250mm
• Hole – 30mm
• Thick – 2.4mm

• Art 73 – Diamond blade Ø 300 (Profi-Continuous Crown)
• Ø 300mm
• Hole – 30mm
• Thick – 2.7mm

• Art 60D – Diamond blade Ø 200 (Professional Turbo)
• Ø 200mm
• Hole – 30mm
• Thick – 2.4mm

• Art 79 – Diamond blade Ø 250 (Professional Turbo)
• Ø 250mm
• Hole – 30mm

• Art 60C – Diamond blade Ø 300 (Professional Turbo)
• Ø 300mm
• Hole – 30mm

DIAMOND CUTTER HEADS FOR DRY BORING WITH FLEX (11000 RPM.)

• Art 53DS – Ø 20mm
• Art 54AS – Ø 25mm
• Art 55S – Ø 35mm
• Art 65S – Ø 40mm
• Art 57S – Ø 50mm
• Art 57AS – Ø 60mm
• Art 58S – Ø 65mm
• Art 87D – Guide to V in order to begin the hole.

DIAMOND CUTTER HEADS FOR WET BORING WITH Ø 10MM SHANK.

• Art 107511 – Centering drill for guide (only on soft materials)
• Art 53A – Ø 6mm – (3300rpm)
• Art 53B – Ø 8mm – (2500rpm)
• Art 53 – Ø 10mm – (2000rpm)
• Art 53D – Ø 20mm – (1000rpm)
• Art 54A – Ø 25mm – (800rpm)
• Art 54B – Ø 30mm – (660rpm)
• Art 55 – Ø 35mm – (570rpm)
• Art 56 – Ø 40mm – (500rpm)
• Art 57 – Ø 50mm – (400rpm)
• Art 57A – Ø 60mm – (330rpm)
• Art 58 – Ø 65mm – (300rpm)
• Art 59A – Ø 75mm – (260rpm)
• **** – Other measures available on request
• Art 87D2 – Guide for perforation with control water.